Last week, I was fortunate to be able to do a session “In the trenches by day, aspiring to be an architect by night” at our own VMUG in Belgium. Together with my good friend Maarten Van Driessen, we did a session on how to best approach a new design from an architectural point of view. This was a high-level […]
In part 4 of our VCAP7-DTM design study guide, the network design will be discussed. This section will be broken down into some key topics that will guide you in your design and study for the VCAP7-DTM design exam. As before if you have missed any of the previous parts. Following index provides a nice overview: Index VCAP7-DTM Design study […]
Continuing our VCAP7-DTM design study guide, we will continue with section 4: physical storage design. In sections 1 to 3 of the blueprint, we started with the logical and conceptual designs of the VMware methodology. Based on this we created the physical design, which should contain all building blocks that are going to be used for that specific use-case. Based […]
In the previous post of our VCAP7-DTM design study guide, we discussed sections 1 and 2 of the blueprint. These were logical and conceptual designs of the VMware methodology. Now based on these, we will continue our design and start with the physical part of the designing process. Once more, designing a solution for a customer is an agile process. […]
I recently passed my VCAP7-DTM Design (3V0-752) at VMware Empower 2019 in Lisbon and wanted to share my experiences and give you some advice on a small VCAP7-DTM Design study guide. As I recently passed the VCP-DTM 2019 exam, I thought the VCAP exam would be similar but this was not the case. It was a difficult exam that tested […]